36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
36" Mahogany Grain Fiberglass Entry Door Slab (3/4 Lite) - Pease Doors: The Door Store
SKU: SE-2P4-3279-RFG-PRM

Mahogany Grain Fiberglass Entry Door Slab (2 Panel 3/4)

$629.00

Panel only - does not include jambs (sold separately or as a prehung unit)

Size
Glass options
Prep
4 in stock

shipping policy

return policy

Description

The Pease Fiberglass Door with beautiful Mahogany grain detail. Replace just your door slab and keep your existing jambs and brickmold. A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and feel free to contact us with any measurement or fit questions.

  • Highest quality wood grain fiberglass for easy finishing & durability
  • Neutral tan finish that can be painted or stained, see our paint category to purchase paint/stain

Modern 2 panel 3/4 length style looks great with or without glass. Additional glass options can be found in our door glass section. This door also has an ideal panel configuration for a pet door to be installed in lower panel.

Sizes & Measurements:

Style: 2 Panel 3/4 Length

31.75" x 79":

  • Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
  • Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel)
  • Panel Thickness: 1.75"
  • Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section)

35.75" x 79":

  • Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
  • Slab height: 79.0" (referred to nominally as an 80" or 6' 8" tall panel)
  • Panel Thickness: 1.75"
  • Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section)

31.75" x 95":

  • Slab width: 31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
  • Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel)
  • Panel Thickness: 1.75"
  • Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section)

35.75" x 95":

  • Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
  • Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel)
  • Panel Thickness: 1.75"
  • Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section)

Need help measuring your rough opening? Our free SmartFit tool guides you through every measurement so you order the right size the first time. Get started → smartfit.peasedoors.com

Prep & other specifications:

  • Select either No Hinge or Lock Prep or Standard Hinge & Lock Prep:
    • No Hinge or Lock Prep: allows for lock placement as desired and hinge side edge unfinished and can be mortised for hinge placements as needed
    • PEASE Standard Hinge & Lock Prep 79" tall doors:
      • Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 37.5" to top of second hinge, 68.5" to top of bottom hinge
      • Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 40.375" from the top edge of the door
    • PEASE Standard Hinge & Lock Prep 95" tall doors:
      • Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 32.5" to top of second hinge, 58.5" to top of third hinge, and 84.5" to top of bottom hinge
      • Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 50.875" from the top edge of the door
  • Trimming: Can trim up to 2 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height (contact us to discuss if you need a door that requires more than 2 inches of trimming off bottom)
Additional specifications:
  • Comes in a neutral tan color ready to be stained or painted. See our paint category to purchase paint or stain
  • Highest quality fiberglass for easy finishing & durability
  • Composite bottom edge to resist moisture/rotting
  • Comes with a drive-on sweep with 7/8" between darts
  • Wood edge door system for ease of installation and clean look
  • Reinforced LVL stiles & full length lock block on both sides of door for added security and strength
  • High density polyurethane insulation for maximum thermal efficiency
Finishing & Installation:

1. Before finishing, remove existing door and place onto the new door slab. We recommend placing the existing door slab onto a sawhorse or folding plastic table (just not a surface that could scratch or damage the door). If the door came in a cardboard box it can serve as a nice worksurface to protect the door.

2. Check that the new door width, height, and thickness match the existing door. If you need to trim the door height (up to about 2" is OK), we recommend trimming off the bottom and then use a U style door sweep to seal up the unfinished edge. Trimming the width is a little trickier and you really shouldn't take more than about 1/8" off each side. Best option here is to use a planer tool.

3. Trace hinges onto new door by aligning the existing door on top of new door and tracing with a pencil. Mark each hinge top, bottom, and how far into the door (towards the outside) the hinge needs to seat. We recommend using a combination square to ensure you get the measurements as accurate as possible. If needed, you can also trace the lock bore (holes for the lock) onto the new door as well.

4. Next create the mortise slot for the hinges on new door. We recommend using a utility knife to score the edges of where the hinge will sit. Then, using either a chisel or router, remove the wood and create the recess for each of the hinges.

5. Next we recommend turning the door onto the lock edge so the hinge edge is facing to the sky. Place hinges to their mortise slots and pre-drill hinge holes using a 1/8" or 1/16" drill bit.

6. Screw hinges to the door. We recommend using 2-3" long screws for the top 2 holes on the top hinge. This will help the door fight against gravity and stay square/operating smoothly for longer.

7. Hang the door into the opening. This is a 2-3 person job, depending on how heavy the door is. It can help to use rags or a block of wood to hold the door into position.

Option a: Without removing hinge pins - start by screwing the top hole of the top hinge in first and work your way down.

Option b: Removable hinge pins. If your hinges have removable pins, you can screw one half of each hinge to the door and the other into the jamb, align the door into the opening such that the hinges fit back together and then you can drop the pins back in.

8. Check for smooth operation and for the door to be square in the opening. There should be about 1/8" to 1/4" of space between the lock edge of the door and the jamb. Shim hinges and plane lock edge of door as needed.

9. Install the lock (cutting the bore holes and mortising for the latch and deadbolt as needed). Tip: don't cut all the way through the door with the hole saw -- cut about 2/3 through and then come in from the other side.

10. Clean the door (get all of the dust debris off of the surface of the door)

11. Paint the door. Click here for our guide on how to paint your door. We recommend our paint or any exterior grade acrylic latex paint.
View details

Customer Reviews

Overall rating: 5.0 / 5 from 20 reviews.

Customer photo review of Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

Door is beautiful and well made. It was an easy install and the overall value and service was great. We are very happy. I highly recommend Pease Doors.

James J. 5/5 Verified

Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

Customer photo review of Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

We love our new doors. We purchased three of the 3/4 glass slab door and side windows for the front door and they are beautiful. I called customer service to make sure I was ordering everything correctly and avoid return hassle. I spoke with Vicky and she walked me through step by step and was so helpful. She was spot on! This was very easy to do and I’m so happy with these doors. Thank you Vicky!

Hayley C. 5/5

Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

Customer photo review of Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

Door was easy to paint and install. Shipping was exceptionally fast especially for the size. Looks great and would totally use Pease Doors again for a project.

Brian K. 5/5 Verified

Smooth Fiberglass Entry Door Slab (2 Panel 3/4)

Customer photo review of Mahogany Grain Fiberglass Entry Door Slab (2 Panel 3/4)

I absolutely love this door. It is exactly what I have been looking for. The quality is great. Shipping was fast. Door was very well packed and it arrived in perfect condition. Customer service is the perfect example of what customer service should be in all retail. Carrie was pleasant and able to answer my questions. Thank you Pease Doors.

Carolyn F. 5/5

Mahogany Grain Fiberglass Entry Door Slab (2 Panel 3/4)

Customer photo review of 36" Smooth Fiberglass Entry Door Slab (3/4 Lite)

We got both the door and the window kit and I couldn't love it more. It lets in so much natural light in an area that didn't have much. I'm glad we made the choice to go with Pease. Ariel was great to work with and always answered my questions quickly. A pink front door might not be everyone's thing but it's definitely mine!!

Melissa K. 5/5 Verified

36" Smooth Fiberglass Entry Door Slab (3/4 Lite)

Customer photo review of 36" Smooth Fiberglass Entry Door Slab (3/4 Lite)

Beautiful high quality door! Been hanging door for years now. I hung this on our In-law suite. This is a solid very well made door. Material is great to work with, mortised with ease. I highly recommend Pease Doors! Also Pease installed the Saxon 3/4 insert I ordered along with this door, this brought a smile to my face!

Phillip S. 5/5 Verified

36" Smooth Fiberglass Entry Door Slab (3/4 Lite)

I had an incredible experience with our new door from Pease Doors! It was delivered quickly and arrived in perfect condition. Their customer service was amazing they guided me through the entire process, making everything so easy. I couldn’t love our new door more! It brings so much light into our foyer and even makes the space feel bigger. Highly recommend Pease Doors for your door project!

Caro L. 5/5 Verified

Mahogany Grain Fiberglass Entry Door Slab (2 Panel 3/4)

We are very pleased with our entire door system from Pease door. The communication was consistent, the products arrived quickly, and everything was in great condition. The installation was easy and the door and sidelights have held up well! We were able to get an affordable custom-looking door that improved the curb appeal of our home.

Julie B. 5/5 Verified

36" Smooth Fiberglass Entry Door Slab (3/4 Lite)

Thank you for your prompt attention on the delivery of my new front door. That was very important as I was in a time crunch and Pease Doors delivered. I would use definitely use them again.

Joe M. 5/5 Verified

36" Smooth Fiberglass Entry Door Slab (3/4 Lite)