Doors designed to exacting specifications and built to last a lifetime. All at direct pricing. Browse our selection of exterior (entry, patio, storm/screen) doors as well as our interior doors. If you don't see what you need please don't hesitate to contact us.
The Pease Fiberglass Door. Replace just your door slab and keep your existing jambs and brickmold or replace your entire door system.
A perfect replacement for Pease (carbon & steel) doors as well as most entry doors by Stanley, Taylor, Mastercraft, Perma Door, Castlegate, Masonite, Therma Tru, Jeld-Wen, Plastpro, and many others. Please make sure to check your measurements (door height, width, and thickness) and contact us with any measurement or fit questions.
Modern 2 panel 3/4 length style looks great with or without glass. Additional glass options can be found in our door glass section. This door also has an ideal panel configuration for a pet door to be installed in lower panel.
Sizes & Measurements:
Style:2 Panel 3/4 Length
31.75" x 79":
Slab width:31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
Slab height:79.0" (referred to nominally as an 80" or 6' 8" tall panel)
Panel Thickness: 1.75"
Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section)
35.75" x 79":
Slab width:35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
Slab height:79.0" (referred to nominally as an 80" or 6' 8" tall panel)
Panel Thickness: 1.75"
Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 49" Cut Out (takes standard 3/4 Lite glass in our door glass section)
31.75" x 95":
Slab width:31.75" (referred to nominally as a 32", 2/8, or 2-foot-8-inch-wide door)
Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel)
Panel Thickness: 1.75"
Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section)
35.75" x 95":
Slab width: 35.75" (referred to nominally as a 36", 3/0, or 3-foot-0-inch-wide door)
Slab height: 95.0" (referred to nominally as an 96" or 8-foot-tall panel)
Panel Thickness: 1.75"
Select 2 Panel (no cut out), With Glass: Clear 1 Lite (installed), or Without Glass: 23" x 65" Cut Out (takes standard Full Lite glass in our door glass section)
Need help measuring your rough opening? Our free SmartFit tool guides you through every measurement so you order the right size the first time. Get started → smartfit.peasedoors.com
Prep & other specifications:
Select eitherNo Hinge or Lock PreporStandard Hinge & Lock Prep:
No Hinge or Lock Prep: allows for lock placement as desired and hinge side edge unfinished and can be mortised for hinge placements as needed
PEASE Standard Hinge & Lock Prep 79" tall doors:
Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 37.5" to top of second hinge, 68.5" to top of bottom hinge
Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 40.375" from the top edge of the door
PEASE Standard Hinge & Lock Prep 83" tall doors:
Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 39.5" to top of second hinge, 72.5" to top of bottom hinge
Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 44.375" from the top edge of the door
PEASE Standard Hinge & Lock Prep95" tall doors:
Hinge mortise (cut out) 6.5" from top of door to top of first hinge, 32.5" to top of second hinge, 58.5" to top of third hinge, and 84.5" to top of bottom hinge
Tubular lock prep comes for 2 3/8" backset lockset and means the door will have two 2.125" holes 5.5" apart, each hole 2 3/8" from the center of the hole to the edge of the door, with the top hole center 50.875" from the top edge of the door
Trimming: Can field trim up to 0.5 inches off bottom, then we recommend sealing thoroughly with caulking and capping with a U-style doorsweep. Sides and top are not trimmable. For factory trimming (~1 to 5 inches of height), please contact us. This is a replacement for most entry doors (front, kitchen, side, garage/man door, etc.) and can also often be trimmed and used as a replacement for patio doors which are typically shorter in height.
Construction & Materials
Premium Build Construction: Stronger Than Standard Doors
Our fiberglass entry doors are built using a Premium Build configuration featuring full-length 4" LVL (laminated veneer lumber) side stiles on both sides of the door. These engineered stiles run the full height of the slab, delivering a stronger, heavier, more rigid door than the simplified constructions used in most entry-level fiberglass doors sold at big box stores.
The fiberglass skins resist warping, rotting, denting, and rusting, while a high-density polyurethane foam core provides insulation and contributes to the door's structural integrity. Composite top and bottom rails help resist moisture intrusion and long-term deterioration. Homeowners and contractors will notice the difference in weight and rigidity the moment they handle the door, a clear indicator of the build quality engineered into every slab.
Reversible Lock Prep: No Wrong Side
Because the 4" LVL stiles run full-length on both sides of the door, hardware can be bored into either stile with equal structural support. This eliminates one of the most common installation errors, boring hardware on the wrong side, and gives buyers full flexibility on door handing. DIY homeowners get peace of mind during installation, and contractors avoid costly rework on the jobsite.
Engineered for Everyday Performance
Together, the full-length LVL stiles, insulated foam core, and moisture-resistant composite rails create a door built to perform reliably in demanding exterior environments. The result is a door that installs with confidence and delivers dependable performance year after year.
Finishing
Surface Texture and Recommended Finish for Smooth Fiberglass Doors
This door features a Satin Smooth (white) surface with a fine linear texture and subtle vertical lines, similar to a woven linen or brushed fabric. This micro-texture provides built-in surface tooth that helps primer and paint adhere without the need for heavy sanding, reduces the visibility of brush marks and roller lines, and helps prevent runs and drips on vertical surfaces.
Before finishing, clean all door surfaces to remove dust, oils, and handling residue, then allow the surface to fully dry. For best results, we recommend using a high-quality bonding primer such as Sherwin-Williams Extreme Bond Primer, followed by a premium exterior-grade acrylic latex paint.
All six sides of the door must be finished, including the front, back, top, bottom, and both edges, to properly protect the door and maintain warranty coverage. When selecting paint colors, lighter to medium shades are typically recommended for doors exposed to direct sunlight, as very dark colors can increase surface temperatures and reduce long-term finish performance.
Fiberglass doors are shipped unfinished or factory-primed depending on selected options. Finishing should be completed promptly after delivery and before prolonged exposure to weather.
Installation
Installation Readiness for Fiberglass Door Slabs
Fiberglass door slabs are designed for installation into existing door frames or for assembly into new prehung units. Before installation, verify that the slab dimensions (width, height, and thickness) match the existing slab for replacements, or the jamb set for new assemblies.
When replacing an existing slab, the original door can often be used as a template. Align the existing door on top of the new slab to transfer hinge locations and hardware positions for accurate placement.
Minor trimming of fiberglass door slabs may be possible depending on the door construction, but allowable trimming limits should always be verified before cutting. Excessive trimming may affect performance or warranty coverage.
Fiberglass door slabs are heavy and should be handled by two or more people during installation. Always support the door evenly to prevent damage to corners or edges.
Complete all recommended finishing steps promptly after installation to protect the door surface and maintain long-term performance.
For complete step-by-step installation instructions, refer to the full installation guide available in the Resources section below.
Door is beautiful and well made. It was an easy install and the overall value and service was great. We are very happy. I highly recommend Pease Doors.
We love our new doors. We purchased three of the 3/4 glass slab door and side windows for the front door and they are beautiful. I called customer service to make sure I was ordering everything correctly and avoid return hassle. I spoke with Vicky and she walked me through step by step and was so helpful. She was spot on! This was very easy to do and I’m so happy with these doors. Thank you Vicky!
Door was easy to paint and install. Shipping was exceptionally fast especially for the size. Looks great and would totally use Pease Doors again for a project.
I absolutely love this door. It is exactly what I have been looking for. The quality is great. Shipping was fast. Door was very well packed and it arrived in perfect condition. Customer service is the perfect example of what customer service should be in all retail. Carrie was pleasant and able to answer my questions. Thank you Pease Doors.
Great customer service. The door and glass insert are even more beautiful in person. Great quality, great delivery and great customer service. I am very satisfied with my purchase.
We got both the door and the window kit and I couldn't love it more. It lets in so much natural light in an area that didn't have much. I'm glad we made the choice to go with Pease. Ariel was great to work with and always answered my questions quickly. A pink front door might not be everyone's thing but it's definitely mine!!
Beautiful high quality door! Been hanging door for years now. I hung this on our In-law suite. This is a solid very well made door. Material is great to work with, mortised with ease. I highly recommend Pease Doors!
Also Pease installed the Saxon 3/4 insert I ordered along with this door, this brought a smile to my face!
I had an incredible experience with our new door from Pease Doors! It was delivered quickly and arrived in perfect condition. Their customer service was amazing they guided me through the entire process, making everything so easy. I couldn’t love our new door more! It brings so much light into our foyer and even makes the space feel bigger. Highly recommend Pease Doors for your door project!
We are very pleased with our entire door system from Pease door. The communication was consistent, the products arrived quickly, and everything was in great condition. The installation was easy and the door and sidelights have held up well! We were able to get an affordable custom-looking door that improved the curb appeal of our home.
Thank you for your prompt attention on the delivery of my new front door. That was very important as I was in a time crunch and Pease Doors delivered. I would use definitely use them again.