ODL Sliding Magnetic Blind Controller

Replacement Operator for ODL Door Glass with Internal Blinds

We offer replacement magnetic operators for ODL internal blind glass units. Note that the old style ("Light Touch") comes in two different sizes, depending on the height of your glass. The new style ("Blink") comes in four different sizes depending on glass height. Glass height is about 2" shorter than the height of the plastic frames that hold glass into a door, measured from corner to corner along the face of the door.

These operators come standard in white. If you require a different color, please contact us at info@peasedoors.com

Light Touch Operators

Replacing ODL Light Touch Operator:

1. Lower the blinds all the way down.
2. Loosen the two screws in glass frame closest to operator.  
3. Twist the operator clockwise and remove it. This may require a strong tug, as the magnetic bond is quite strong.
4.  Clean the glass before attaching new operator.
5. In the same location you removed the old operator; insert the new operator tabs under the blind frame.
6. Raise the operator to the top of the unit. You will hear one click when the procedure is complete and the magnets are engaged.

Blink Operator & Track Replacement Kit

Track Lengths for Blink Operators by Glass Size

• 22" x 36": 23"
• 22" x 48": 24"
• 22" x 64": 36 1/4"
• 22" x 80": 44 1/8"

How to Install Blink Operator & Track Replacement: