Brickmold Header

Brickmold header. Also known as brickmould, brick mold, or exterior trim. Primed white and mitered on both ends. Use with a pair of brickmold legs, or order the brickmold 3 piece set.

Built for the outdoors

• Treated hardwood, not a composite or plastic, so it cuts, nails and paints like real wood
• Treated top to bottom to resist rot and decay
• Water-resistant factory primer gives paint a smooth, even base
• Won't warp, swell or shrink like composites, and won't turn brittle in the cold like PVC

Size options (long point is the overall length, measured along the outside edge of the miters):

Single doors:

• 28" long point for 23.75" wide doors (commonly known as 2/0 or 24" doors)
• 30" long point for 25.75" wide doors (commonly known as 2/2 or 26" doors)
• 32" long point for 27.75" wide doors (commonly known as 2/4 or 28" doors)
• 34" long point for 29.75" wide doors (commonly known as 2/6 or 30" doors)
• 36" long point for 31.75" wide doors (commonly known as 2/8 or 32" doors)
• 38" long point for 33.75" wide doors (commonly known as 2/10 or 34" doors)
• 40" long point for 35.75" wide doors (commonly known as 3/0 or 36" doors)
• 42" long point for 37.75" wide doors (commonly known as 3/2 or 38" doors)
• 44" long point for 39.75" wide doors (commonly known as 3/4 or 40" doors)
• 46" long point for 41.75" wide doors (commonly known as 3/6 or 42" doors)
• 52" long point for 47.75" wide doors (commonly known as 4/0 or 48" doors)

Double doors:

• 52.5" long point for a pair of 23.75" wide doors
• 64.5" long point for a pair of 29.75" wide doors
• 68.5" long point for a pair of 31.75" wide doors
• 72.5" long point for a pair of 33.75" wide doors
• 76.5" long point for a pair of 35.75" wide doors

If you are not sure about the size, choose the next size up and trim it with a miter saw on the job site. Need a header for a door with sidelites? Contact us and we can cut one to order.

Specifications:

• 2" wide, 1.25" thick
• Primed white and ready for paint
• Mitered
• Install with finishing nails