Store owner replied:
Thank you for sharing the additional context. We understand how confusing it can be when you’ve sent photos and are trying to make sure you’re ordering the correct replacement part.
Based on what you described, it sounds like you received a screw-on sweep when you needed a push-on style, so we understand why you placed a second order. We’re sorry we weren’t able to help identify the correct style before the original order was placed.
If you ever have questions about compatibility or aren’t sure which replacement part you need, please reach out to us directly at info@peasedoors.com. Our team is happy to review photos and help confirm the correct product before you order.
Spents several weeks looking for an exterior door bottom seal for a door with non-standard kerf spacing. Everything assumed a 7/16" spacing, but mine was narrower. Finally went to our local door experts, and when they didn't have anything they directed us to the Pease website. Bingo! Found one that was the same as the OEM one that came installed on the door. As it's November, I decided to not take the door off the hinges, so came up with a way to press the new one on using a 2x4 and a large flathead screwdriver. 10 minutes and it was completed, with no breezes coming from the corners like the old worn out one had. Thanks!
This product worked perfectly on my exterior door manufacture by Pella. The 2 mounting ribs used to secure it to the bottom of the door's slots were designed for this. I could not buy this anywhere else except from the original manufacturer. Pease provided a great product, easy to order and shipping was great.
I also ordered corner seals and installation was very easy
I was glad to find Pease Doors website during a search for a door sweep for a Pella front door. SKU#D112003 is made for a door with a 1/2" between the dado's cut into the bottom of a Pella front door. All the local supply houses have 5/8" and that will not work. Pella will sell you a replacement sweep for $67.64 plus tax. Pease Doors sold theirs for $19.00 plus shipping for a total of $28.00. Hopefully this one last longer that the one I purchased from Pella a few years back.
Great Job to Pease Doors!
THE QUALITY WAS NOT AS EXPECTED. this listing stated that this was a quality item. i installed it after removing the door. upon installing the 2 staples on the ends, like the original, the plastic cracked and split. since this was garbage, i replaced the whole door to avoid an oddball size sweep i can buy locally.
Store owner replied:
Hello Shon,
Thank you for sharing your feedback. We’re truly sorry to hear about your experience and understand your frustration with the quality of the item you received. This is not the standard we aim to provide, and we regret that the product did not meet your expectations.
We take pride in offering quality products and would appreciate the opportunity to look into this further. Please don’t hesitate to reach out to us directly at info@peasedoors.com, and we’ll do our best to resolve the issue for you.
Thank you again for bringing this to our attention. We value your feedback and are committed to improving our products and service.
This door bottom was a perfect fit for my Pella fiberglass entry door, despite the description! The length was exactly correct for my 36" door and required no cutting. The "kerf" of the door bottom is 5/8 inches which is narrower than door bottoms that you can purchase in hardware stores and home goods stores. So, it was GREAT to find this item and Pease should make it better known that it's not just for steel doors!
Have an old Pease door that I couldn’t find the correct barb widths anywhere. I had them measured at 3/4” apart and wasn’t sure if this model would fit correctly. Read some of the other reviews saying they had good luck with this on an old Pease door, so I figured I would take a shot. It installs pretty tight but gently tapping with a hammer as you go down the line worked well for me. As you can tell from the picture the new and old sweeps are identical as far as I can tell.
Pella Window/Doors no longer carried this door sweep for their doors. This product heat and water penetration into my house. I replaced two door sweeps and plan on ordering two more. Great product, I measured between the barbed tabs before ordering. Great product the will make a difference with insects, water, cold and heating seasons.
Purchased a door sweep for a hard-to-find size, fit nice and snug. Product arrived in quality packaging, in a reasonable time. Intend to shop with this group again.
My 15 year old Pella exterior 9 lite fiberglass door needed a new bottom door seal. Pease was the only place I could find that had the correct kerf spacing (approx 5/8 in) It is labeled as "36" Pease Drive-On Steel Door Sweep". Note that I do not have a steel door. The design looked very similar to the existing seal. I did have an installation issue. Even with my adjustable threshold all the way down, the door was closing real tight/binding on the bottom. Since I could not find an exact replacement, I decided to cut 1/8" off the bottom of the door. If you do not have an adjustable threshold, be careful not to cut too much off the bottom. The only problem was that the cutout kerf on the door was not deep enough for the seal kerfs once the door was shortened. Found an Irwin 1/8in wood chisel on Amazon. It fit the 1/8 in kerf slots perfectly. I carefully shaved about an 1/16 off the bottom of each kerf slot. I found that I was able to just hand shave with little use of a hammer. Just takes a little practice and patience. Took less than a hour to do. Bought a couple extra seals for future use. The seal is perfect now. I did not have to adjust the threshold upward when done. My existing door seal had thin foam attached to the door seal on each end (approx 1 inch) where there is no kerf. Not sure if I needed it but I bought "Yotache Neoprene Rubber Foam Tape 1 Inch Wide x 1/16 Inch Thick, 33 Ft " on Amazon and cut and fit a couple of pieces together on each end.
Looks good. Need to cut for 32” doors. Also need to touch up / refinish doors - waiting for warmer weather before taking doors off hinges. Appears the door sweeps will work.
Pella fiberglass exterior doors had well worn sweeps and it was time to replace them.
Pease Doors had the correct replacement part at a third of the price Pella quoted.
They fit well and should last as long as the originals.
Service was flawless !
Thank you Pease Doors !
Part is as described. But doesn't fit to door. I'm really needing the darts to be at 1/2 inch at the base....Thought I'd try with 5/8 at the base for this part, just didn't work!
Store owner replied:
Hi Tom, this sweep is designed to replace existing sweeps with 5/8" between the barbs at the base. Please feel free to reach out to us if you are still needing a replacement
Part was correct, but when we went to staple it like the original part it split the plastic. Not as heavy of plastic as the original part. Now I have a piece that is dragging when you open or close the door.
Store owner replied:
Hi Robert,
I'm very sorry to hear about the experience here. It sounds like the item you received might have been defective, or there's something else impacting the installation we need to review. Can you please reach out to us directly at info@peasedoors.com so we can further assist you?
-The Pease Doors Team
Was an exact match for my Pella fiberglass door. Looked everywhere for a replacement. Thanks.
Actually did not use because I ordered the wrong one. I could have verified the size if the drawing on your website had dimensions on it. I did return it and talked to a lady there about my return. I was in business for over 30 years and had to coach customer service to some of our staff. I also talked to hundreds of vendors customer service staff over the years and she is probably the best customer service person I have ever talked with! Knowledgeable, friendly, courteous, helpful, great personality. I don't know her name but I want her to know in my book, she's great!
I had difficulty finding a sweep with the kerfs 1/2 inch apart. Amazon did not have one. Thankfully I took a chance and this one fit my steel door. It pretty much matched the one I took off! Door closes nice n tight now! Thank you!
