SKU: G2236VED

Venting 12 Lite Glass and Frame Kit (Half Lite)

$389.00

Measure plastic frame width and height (outer edge). More on how to measure.

Frame size
Glass type
In stock
Description

Door Glass and Frame Kit

New door glass can transform your entryway without the need to replace your entire door system.

Kit includes door glass, inside and outside door glass frame set, screws, and screw caps.

Easy Installation

Our kit makes installation easy and quick. The outside frame comes pre-caulked to the glass. All you need to install the glass kit into your door is a screwdriver to secure the inside frame to the outer frame.

Insulated Safety Glass

Double pane insulated glass has been tempered for safety and thermally sealed to be air and watertight.

High Performance Frame

Kit includes standard white high performance plastic frames that resist cracking, warping, and discoloring due to heat and sunlight. Standard white frames are ready to install and do not need to be painted, but can be painted after lightly sanding and priming. If you would like to order a frame already primed for painting, or if you intend to stain your door glass frames, please contact us to place a special order.

Measurements:

Style: Half Lite (rectangular)

Standard Size:

  • Frame outside dimensions: 24" x 38" (replaces frames 23 1/2" to 24" wide and 37 1/2" to 38" tall)
  • Door cutout dimensions: 23" x 37"
  • Glass dimensions: 3/4" thick, 22" wide, 36" tall

Narrow Size:

  • This size is typically found on NARROW (30" and narrower) doors
  • Frame outside dimensions: 22" x 38" (replaces frames 21 1/2" to 22" wide and 37 1/2" to 38" tall)
  • Door cutout dimensions: 21" x 37"
  • Glass dimensions: 3/4" thick, 20" wide, 36" tall

Installation

CAUTION: RAISE the lower sash (white lever raises sash) before installing the kit into the door. Pinching the latches under the frame can damage the kit.

Venting Door Glass Lever Closeup

Install frames with the screws to the inside of the home. Tighten screws until frame is seated on the door. Do not exceed 15 in-lbs of torque. Over-tightening screws may result in a wavy appearance of the frame. Finish by installing screw hole covers (caps) by inserting the shallow edge of cover into the frame aligning with the frame profile. Press firmly into place, making sure the cover is flush with the profile.

Easy Installation

Our kit makes installation easy and quick. The outside frame comes pre-caulked to the glass. All you need to install the glass kit into your door is a screwdriver to secure the inside frame to the outer frame. Cover the screw heads with the included plastic caps, paint or stain if desired, and your project is finished! More on installation

Insulated Safety Glass

STANDARD and NARROW sizes come with double-pane insulated glass that is sealed to be air and water tight and has been tempered for safety.

SHORT (22" x 26") size comes with single-pane glass that has been tempered for safety.

High Performance Frame

Kit includes standard white high performance plastic frames thatresist cracking, warping, and discoloring due to heat and sunlight. Your white frame is maintenance free, does not require paint, and will not yellow. Due to the design, we recommend you do not paint this frame.

Cleaning

Avoid contact with abrasive cleaners and solutions containing corrosive solvents or acid solutions. Glass can be cleaned using a soft cloth, and glass cleaner.