Ships in about 2 weeks, then 2 to 4 business days with ground shipping.
How we estimate
Most in-stock items that need no shop work leave our warehouse the same or next business day. Ordering by 12 pm Eastern, Monday to Friday, gives yours the best chance of shipping the same day.
Shop work starts once everything is in stock: trimming, cutting or prep takes 1 business day, finishing (priming, painting or staining) 1 to 3, and assembly, such as a prehung door system, 2 to 5. Out-of-stock items without a restock date usually ship in about 2 weeks, plus any shop work.
Ground parcels take 2 to 4 business days. Doors, sidelites and other large items go by freight: Priority Freight takes 2 to 5 business days and economy freight 7 to 15; you choose at checkout. Weekends and carrier holidays aren't counted. These are estimates, not guarantees.
30-day returns if unused and in the original packaging.Return policy
Questions? Call or text a door expert at 513-871-8907.
Premium wrap-around style doorsweep. Fits all doors 1.75" thick. Can be trimmed to fit doors up to 36" in width.
This is a great doorsweep if you do not know what brand door you have or do not know how your current door sweep attaches to your door. It is also a great choice to replace drive-on or staple on sweeps where you do not want to remove the door from its hinges.
Universal fit for 1.75" thick steel, wood, and fiberglass doors
Ultra high quality rigid PVC retains shape and resists ripping and tearing
Flexible up to -25 degrees F
Moisture drip fin (directs water away from the door)
Fins and hybrid bulbs (bulbs with small fins at bottom) for effective seal
Slotted adjustment holes allow for sweep to be adjusted to fit different door-to-threshold gaps from 1/4" to 3/4"
Note: Requires screws for installation. We recommend flat head 1/2" long screws. For wood or fiberglass doors, use pan head wood screws, course thread. For steel doors, use sheet metal pan head screws.
1. Open the door and remove the old sweep. If the old sweep is screwed or otherwise tightly fastened to the bottom of your door, you may need to remove the door from hinges.
2. Slide the new sweep on, using a block of wood or a hammer as needed to tap the sweep into place.
3. Trim excess with scissors, shears, or a small hand-saw.
4. Adjust the sweep up/down as needed to tightly seal (overlap about 1/8") against the top of your sill.
5. Install screws on inside of home, drilling pilot holes as needed (especially if you have a steel door). We recommend flat head 1/2" long screws. For wood or fiberglass doors, use pan head wood screws, course thread. For steel doors, use sheet metal pan head screws.
Product Type
Door Sweep
Installation
Wrap-around, screws to the door face
Length
36"
Pieces Included
1 sweep
Material
Rigid PVC
Fits Door Thickness
1-3/4"
Fits Door Width
Up to 36" (trim to fit narrower doors)
Compatible Doors
Universal (most 1-3/4" doors)
Fits Door Material
Fiberglass,
Steel,
Wood
Product Weight (lbs.)
0.2
Our limited product warranty doesn't cover weatherproofing. If it arrives damaged or isn't right, tell us and we'll make it right.
Ships by ground parcel with UPS, FedEx or USPS: 2 to 4 business days once it leaves us. Tell us about any shipping damage within 15 days of delivery.
Free pickup at our Cincinnati warehouse is available at checkout.
Returns
Return it within 30 days of delivery if it's unused, uninstalled and in its original packaging. Return shipping is yours to pay. Start a return in our returns portal.
I originally thought I was not going to like the wraparound door weather stripping. It does have a clean look in the front. The only thing is in the back. You have to drill to put screws to hold it in place. But it ended up working out no drafts
Store owner replied:
Hi Tracy, thank you for your feedback! We're sorry to hear that your door sweep cracked during installation. We understand how frustrating this must be, especially when taking care during installation. We would love the opportunity to make this right! Please reach out to our customer service team so we can look into the issue and help find a solution.
-The Pease Doors Team
For a single, senior who is kind-a handy, the 36" Universal Door Sweep went on fairly easily. The hardest part was trimming off the end to fit the door. (Heavy duty kitchen shears helped!) Sadly, it came without screws, so off to the local hardware store to get some.
It's better than the first one I received, at least the screw slots are not cracked, but it's bent like a bow (see attached photo). I know it's only a small order and I'll eat the loss, learn my lesson and shop the big box store where I can actually see what I'm buying. It appears like no one even looks at what their shipping out.
I was interested in your doors, but after seeing the quality of the products I received, I don't think so.
John G
The best part about your ordering process is that you anticipate that your customers don’t necessarily have a lot of experience so step by step guidance in selecting the proper product is very helpful as well as installation instructions.
I had looked for a long time to find the right weather strip could never find one the right size always to thick could hardly open door I told them my problem and they had what I needed thanks
Really good product and fits well. I had to replace the door sweeps I installed just two months ago that I purchased on Amazon because they literally fell apart. These are constructed much better. I was a little disappointed that they aren’t a true white, but instead an off white which does not exactly match my white doors. The screw slots are a bit wide but manageable. It would have been if the screws were included. They seal well to the threshold so am sure they will keep the drafts and bugs out!
Give me the correct part when I request it. I gave you the name of the door, when it was installed by the contractor, and the part number I thought it was. After paying $50 it looked correct, I cut it, and it the door would not shut without force. I put the old one back on. What really upsets me is that Menards carries something very similar for 11.00, but I wanted to be sure, so I paid for the Pease part. Lesson learned. :(
Store owner replied:
Hi Tom,
Sorry to hear that the 36" Universal Wrap-Around Door Sweep you received did not fit correctly. That was the only product that we could recommend based off your measurements. Please reach out to our customer support team with your order details so we can investigate this specific issue and see how we can assist. We appreciate you bringing this to our attention and hope to have the opportunity to assist you further.
Store owner replied:
Hi Michael,
Thank you for your feedback. We’re always looking for ways to improve our products and services, and we appreciate hearing your perspective. If there’s anything specific we can assist with, please reach out to info@peasedoors.com, we’re happy to help.
— Pease Doors
Cannont figure out if my current threshold is removable? So, cannot us this device.
Store owner replied:
Hi Robert,
Thank you for reaching out! To start, you do not need to remove your threshold to install a door sweep. Please reach out to us at info@peasedoors.com so we can further assist with installation.
- Pease Doors
I am certain this company will get no more money from me. Received a damaged part-shipped four days after ordering-and was promised a partial refund if I accepted it. That refund never happened. To add insult to injury, the seal failed within two weeks, completely shredding the fins.
Store owner replied:
Hello John,
Thank you for taking the time to share your experience. We do want to provide clarity, as the review leaves out several key details that may be helpful for others.
When you first reached out, the concern you reported was bends in the product—something that can occur naturally in transit and typically resolves once the part is installed. We advised you to attempt the installation and to contact us right away if you encountered any issues so we could make it right.
You declined to try the install and requested a replacement. To meet you in the middle, we offered a partial refund for you to proceed with installation, with a clear guarantee that if the product did not perform correctly, we would send a new one at no cost. The last message we received from you was a question about the refund amount. After we provided that information, we did not receive confirmation or a reply, so no refund or replacement could be processed.
We have not heard from you regarding any seal failure, but we are absolutely willing to help resolve this. Please contact us directly at info@peasedoors.com
so we can review the issue and provide the appropriate support.
– The Pease Doors Team
Second item also arrived damaged due to poor packaging. However, I used it though it didn't work out for my door.
This was a replacement sweep for a Pella Entry door. Sweep was perfect as there isn't much space between bottom of door and threshold (i.e. less than .24"). Big box sweeps were min .5" so needed to be trimmed to fit. Pease was the only vendor I could find that had this sweep.
Exterior doors to this 25+ year old Morton Building are no longer made and the bottom track sweep offered by Discount Doors and Windows (Morton's door provider) is too narrow. This sweep from Pease fit perfectly over the 1.25" wide door frame and works well -- a bit difficult to open and close the door, but I expect it will get better with use.
The door sweep fell apart while installing. I emailed for a refund or to get a new part, but I haven't heard back from customer service. Really hoping to get this resolved.
Store owner replied:
Hello William,
Thank you for your feedback. We did receive your email on Saturday, July 26th, which was outside of our business hours, and responded on Monday the 28th—our next day in the office. We're glad to hear the matter was resolved, and we truly appreciate your patience as we got back to you within our normal working hours.
If you ever need anything else, don’t hesitate to reach out—we’re always happy to help.
Not as expected. Ordered after installing the new threshold which was nice quality. This was cheaply made and not what we expected in a sweep. Difficult to install
Store owner replied:
Sharon,
Thank you for your feedback. We’re glad to hear the threshold met your expectations, but we’re sorry to hear the sweep didn’t. That’s definitely not the experience we aim to deliver.
We’d love to learn more about what didn’t meet your expectations and see if there’s a better option we can offer. Please feel free to reach out to our team directly at info@peasedoors.com. We're here to help however we can.
— The Pease Doors Team
Premium wrap-around style doorsweep. Fits all doors 1.75" thick. Can be trimmed to fit doors up to 36" in width.
This is a great doorsweep if you do not know what brand door you have or do not know how your current door sweep attaches to your door. It is also a great choice to replace drive-on or staple on sweeps where you do not want to remove the door from its hinges.
Universal fit for 1.75" thick steel, wood, and fiberglass doors
Ultra high quality rigid PVC retains shape and resists ripping and tearing
Flexible up to -25 degrees F
Moisture drip fin (directs water away from the door)
Fins and hybrid bulbs (bulbs with small fins at bottom) for effective seal
Slotted adjustment holes allow for sweep to be adjusted to fit different door-to-threshold gaps from 1/4" to 3/4"
Note: Requires screws for installation. We recommend flat head 1/2" long screws. For wood or fiberglass doors, use pan head wood screws, course thread. For steel doors, use sheet metal pan head screws.
1. Open the door and remove the old sweep. If the old sweep is screwed or otherwise tightly fastened to the bottom of your door, you may need to remove the door from hinges.
2. Slide the new sweep on, using a block of wood or a hammer as needed to tap the sweep into place.
3. Trim excess with scissors, shears, or a small hand-saw.
4. Adjust the sweep up/down as needed to tightly seal (overlap about 1/8") against the top of your sill.
5. Install screws on inside of home, drilling pilot holes as needed (especially if you have a steel door). We recommend flat head 1/2" long screws. For wood or fiberglass doors, use pan head wood screws, course thread. For steel doors, use sheet metal pan head screws.